PREMIUM 1.2358

Delivery hardness max. 325 HB
Tensile strength (approx. on delivery) 1100 N/mm2
Working hardness max. 60 HRC
Tensile strength (at max. working hardness) >2180 N/mm2
Working temperature20 up to 400°C
Machinability
Toughness
Wear resistance
Corrosion resistance

Technical properties:

AISI/SAE 1.2358: Tempered tool steel (with focus on cold work). High impact toughness and wear resistance, excellent surface hardenability and through-hardenability. High degree of dimensional stability, good polishability and weldability. AISI/SAE 1.2358 can be a substitute for AISI/SAE D2, AISI/SAE D6, AISI/SAE D3. Working hardness: approx. 33 HRC (delivery condition) up to 60 HRC.

Applications:

AISI/SAE 1.2358: Segmented cutting tools, shear knives, forming dies, cold forming tools, deep drawing dies, cold extrusion tools, bending tools, rollers, embossing tools, mould tools, plastic moulds, hot working tools at low temperature stress.

C 058 up to 062 Ni - up to -
Si 02 up to 05 V 02 up to 03
Mn 07 up to 09 W - up to -
P - up to 003 Cu - up to -
S - up to 003 N - up to -
Cr 43 up to 47 Ti - up to -
Mo 04 up to 06 Co - up to -

Data given should to be taken as a guideline value.

<h3>€co-Präz</h3> 500 mm

€co-Präz

500 mm
Online Shop

<h3>Precision round steel peeled/rough-turned</h3>  mm

Precision round steel peeled/rough-turned

mm
Online Shop

Glossary

Search

Properties

Imprint

ABRAMS PREMIUM STEEL®


is a registered trademark of

Abrams Engineering Services GmbH & Co. KG
Hannoversche Strasse 38
49084 Osnabrueck / Germany

T: +49 (0) 5 41/3 57 39 - 0
F: +49 (0) 5 41/3 57 39 - 39
sales@premium-steel.eu

www.premium-steel.eu
www.steel-guide.eu
shop.premium-steel.eu

Located in: Osnabrueck / Germany
Amtsgericht Osnabrueck / Germany, HRA 6865
VAT-No.: DE 221940667

General Partner

Abrams Engineering Verwaltungs GmbH
Amtsgericht Osnabrueck / Germany, HRB 20019

Managing Director

Dipl.-Wi.-Ing. Dr. Juergen Abrams

DISCLAIMER


The contents of this application have been carefully compiled based on the best technology currently available.

Please note that the ABRAMS STEEL GUIDE provides an overview of general properties and uses and is therefore intended to facilitate the selection of materials. Not least of all due to the numerous application possibilities and their influencing factors, an express written agreement is required in every case in order to guarantee certain properties and values. A liability of any kind will otherwise be excluded. See also http://www.premium-steel.eu/disclaimer.pdf

Abrams Engineering Services GmbH & Co. KG is the sole owner of all rights and contents of this application, unless otherwise indicated. Any further use of any content or results of use in other programs or in print or online media without written authorisation is prohibited. The contents of this application are subject to continuous development. In order to always be able to use the most up-to-date information, the user should inform oneself about any possible updates in the App Store. The contents of this application, whether it be part or the entirety, may be changed, supplemented or deleted without prior announcement. There is no obligation to publish the contents permanently.

©2013 / Patent No.: US 8,463,771 B2
Date of Patent: Jun. 11,2013

Design & Realisation:

Abrams Engineering Services GmbH & Co. KG, www.premium-steel.eu

Realisation of the ABRAMS STEEL GUIDE application for web browser

MORGENROT | WOLF GmbH, www.morgenrot-wolf.de
ABRAMS PREMIUM STEEL
is a registered trademark of T: +49 (0) 5 41/3 57 39-0 sales@premium-steel.eu GTC
Abrams Engineering Services GmbH & Co. KG F: +49 (0) 5 41/3 57 39-39 www.premium-steel.eu DISCLAIMER
Hannoversche Str. 38 • 49084 Osnabrueck / Germany app@premium-steel.eu shop.premium-steel.eu IMPRINT