PREMIUM 1.2080

Delivery hardness max. 250 HB
Tensile strength (approx. on delivery) 850 N/mm2
Working hardness max. 62 HRC
Tensile strength (at max. working hardness) >2180 N/mm2
Working temperature20 up to 200°C
Wear resistance
Corrosion resistance

Technical properties:

AISI/SAE D3: Cold work steel with excellent wear resistance, due to its high chromium carbide content, and excellent cutting power (for laminations up to a thickness of 4 mm). Full hardenability, dimensional stability but medium toughness. The classic among the ledeburite 12 % chromium steels. Working hardness: 58-62 HRC.


AISI/SAE D3: Blanking tools, stamping tools, embossing tools, scraping tools, trimming tools, woodworking tools, drawing tools, press tools, stone moulds, sintered tools, machine knives, hammer cores, ring rollers, thread rolling dies, plastic moulds.

C 19 up to 22 Ni - up to -
Si 01 up to 06 V - up to -
Mn 02 up to 06 W - up to -
P - up to 003 Cu - up to -
S - up to 003 N - up to -
Cr 11 up to 13 Ti - up to -
Mo - up to - Co - up to -

Data given should to be taken as a guideline value.

<h3>Precision flat steel w/o machining allow.</h3> 500 mm

Precision flat steel w/o machining allow.

500 mm
Online Shop

<h3>Precision round steel peeled/rough-turned</h3> 500 mm

Precision round steel peeled/rough-turned

500 mm
Online Shop

<h3>Precision round steel peeled/rough-turned</h3>  mm

Precision round steel peeled/rough-turned

Online Shop






is a registered trademark of

Abrams Engineering Services GmbH & Co. KG
Hannoversche Strasse 38
49084 Osnabrueck / Germany

T: +49 (0) 5 41/3 57 39 - 0
F: +49 (0) 5 41/3 57 39 - 39

Located in: Osnabrueck / Germany
Amtsgericht Osnabrueck / Germany, HRA 6865
VAT-No.: DE 221940667

General Partner

Abrams Engineering Verwaltungs GmbH
Amtsgericht Osnabrueck / Germany, HRB 20019

Managing Director

Dipl.-Wi.-Ing. Dr. Juergen Abrams


The contents of this application have been carefully compiled based on the best technology currently available.

Please note that the ABRAMS STEEL GUIDE provides an overview of general properties and uses and is therefore intended to facilitate the selection of materials. Not least of all due to the numerous application possibilities and their influencing factors, an express written agreement is required in every case in order to guarantee certain properties and values. A liability of any kind will otherwise be excluded. See also

Abrams Engineering Services GmbH & Co. KG is the sole owner of all rights and contents of this application, unless otherwise indicated. Any further use of any content or results of use in other programs or in print or online media without written authorisation is prohibited. The contents of this application are subject to continuous development. In order to always be able to use the most up-to-date information, the user should inform oneself about any possible updates in the App Store. The contents of this application, whether it be part or the entirety, may be changed, supplemented or deleted without prior announcement. There is no obligation to publish the contents permanently.

©2013 / Patent No.: US 8,463,771 B2
Date of Patent: Jun. 11,2013

Design & Realisation:

Abrams Engineering Services GmbH & Co. KG,

Realisation of the ABRAMS STEEL GUIDE application for web browser

is a registered trademark of T: +49 (0) 5 41/3 57 39-0 GTC
Abrams Engineering Services GmbH & Co. KG F: +49 (0) 5 41/3 57 39-39 DISCLAIMER
Hannoversche Str. 38 • 49084 Osnabrueck / Germany IMPRINT