PREMIUM 1.2365

Delivery hardness max. 229 HB
Tensile strength (approx. on delivery) 770 N/mm2
Working hardness max. 52 HRC
Tensile strength (at max. working hardness) 1810 N/mm2
Working temperature20 up to 450°C
Wear resistance
Corrosion resistance

Technical properties:

AISI/SAE H10: Hot work steel with high toughness, heat resistance and tempering resistance. Air-hardening steel grade with good thermal conductivity. Can be cooled with water. Working hardness: 50-52 HRC.


AISI/SAE H10: Extrusion presses, brass casting, press tools, die inserts, die casting moulds, plastic moulds, recipient bushes, pressure dies, press mandrels, tube extrusion mandrels, piecer plugs, press dies, block receivers, screw production, nut production, rivet production, bolts production, hot shear knives.

C 028 up to 035 Ni - up to -
Si 01 up to 04 V 04 up to 07
Mn 015 up to 045 W - up to -
P - up to 003 Cu - up to -
S - up to 002 N - up to -
Cr 27 up to 32 Ti - up to -
Mo 25 up to 30 Co - up to -

Data given should to be taken as a guideline value.

<h3>€co-Präz</h3> 500 mm


500 mm
Online Shop

<h3>Precision round steel peeled/rough-turned</h3> 500 mm

Precision round steel peeled/rough-turned

500 mm
Online Shop

<h3>Precision round steel peeled/rough-turned</h3>  mm

Precision round steel peeled/rough-turned

Online Shop






is a registered trademark of

ABRAMS Engineering Services GmbH & Co. KG
Hannoversche Strasse 38
49084 Osnabrück / Germany

T: +49 (0) 5 41/3 57 39 - 0

Located in: Osnabrück / Germany
District Court Osnabrück / Germany, HRA 6865
VAT-No.: DE 221940667

General Partner

ABRAMS Engineering Verwaltungs GmbH
District Court Osnabrück / Germany, HRB 20019

Managing Director

Dipl.-Wi.-Ing. Dr. Jürgen Abrams


The contents of this application have been carefully compiled based on the best technology currently available.

Please note that the ABRAMS STEEL GUIDE provides an overview of general properties and uses and is therefore intended to facilitate the selection of materials. Not least of all due to the numerous application possibilities and their influencing factors, an express written agreement is required in every case in order to guarantee certain properties and values. A liability of any kind will otherwise be excluded. See also

ABRAMS Engineering Services GmbH & Co. KG is the sole owner of all rights and contents of this application, unless otherwise indicated. Any further use of any content or results of use in other programs or in print or online media without written authorisation is prohibited. The contents of this application are subject to continuous development. In order to always be able to use the most up-to-date information, the user should inform oneself about any possible updates in the App Store. The contents of this application, whether it be part or the entirety, may be changed, supplemented or deleted without prior announcement. There is no obligation to publish the contents permanently.

©2013 / Patent No.: US 8,463,771 B2
Date of Patent: Jun. 11,2013

Design & Realisation:

ABRAMS Engineering Services GmbH & Co. KG,

Realisation of the ABRAMS STEEL GUIDE application for web browser

is a registered trademark of GTC
Abrams Engineering Services GmbH & Co. KG T: +49 (0) 5 41/3 57 39-0 DISCLAIMER
Hannoversche Str. 38 • 49084 Osnabrueck / Germany IMPRINT