AISI/SAE Toolox 33: Quenched and tempered low-alloyed steel good machinability, high toughness and low residual stresses. Can easily be polished, grained, eroded, etched, sliced, welded, nitrided, and coated with PVD (Physical Vapour Deposition). Further heat treatment is not intended. Working hardness without nitriding: approx. 30-36 HRC (delivery condition).
AISI/SAE Toolox 33: Mechanical engineering, machine parts, guide rails, base plates, assembling parts, press brake tools, plate forming tools, wear parts, plastic moulds, moulding frames, forming tools, rubber moulds, die casting moulds.
C | 0,22 | up to | 0,24 | Ni | - | up to | 1,0 | |
Si | 0,6 | up to | 1,1 | V | 0,1 | up to | 0,11 | |
Mn | 0,8 | up to | 0,8 | W | - | up to | - | |
P | - | up to | 0,01 | Cu | - | up to | - | |
S | - | up to | 0,003 | N | - | up to | - | |
Cr | 1,0 | up to | 1,2 | Ti | - | up to | - | |
Mo | 0,3 | up to | 0,3 | Co | - | up to | - |
Specifications
Division of | T: +49 541/357 39-0 | [email protected] | TERMS AND CONDITIONS |
ABRAMS Industries GmbH & Co. KG | [email protected] | www.premium-steel.eu | DISCLAIMER |
Hannoversche Str. 38 / 46 | www.premium-steel.eu/shop | DATA PROTECTION DECLARATION | |
49084 Osnabrück / Germany | IMPRINT |