PREMIUM Toolox 44

Delivery hardness max. 418 HB
Tensile strength (approx. on delivery) 1420 N/mm2
Working hardness max. 45 HRC
Tensile strength (at max. working hardness) 1420 N/mm2
Working temperature20 up to 590°C
Wear resistance
Corrosion resistance

Technical properties:

AISI/SAE Toolox 44: Low-alloyed tool steel with high-impact toughness, quenched and tempered up to approx. 45 HRC. Machinable with suitable tools because of its low carbide content. Good dimensional and shape stability. Can easily be polished, grained, eroded, etched, sliced, welded, nitrided, and coated with PVD (Physical Vapour Deposition). Working hardness: approx. 45 HRC (delivery condition).


AISI/SAE Toolox 44: Mechanical engineering, machine parts, guide rails, base plates, assembling parts, press brake tools, plate forming tools, wear parts, plastic moulds, moulding frames, forming tools, rubber moulds, die casting moulds.

C 0,32 up to 0,32 Ni - up to 1,0
Si 0,6 up to 1,1 V 0,14 up to 0,14
Mn 0,8 up to 0,8 W - up to -
P - up to 0,01 Cu - up to -
S - up to 0,003 N - up to -
Cr 1,35 up to 1,35 Ti - up to -
Mo 0,8 up to 0,8 Co - up to -


<h3>€co-Präz</h3> 500 mm


500 mm
Online Shop

<h3>Precision round steel peeled/rough-turned</h3> 500 mm

Precision round steel peeled/rough-turned

500 mm
Online Shop

<h3>Precision round steel peeled/rough-turned</h3> 1.000 mm

Precision round steel peeled/rough-turned

1.000 mm
Online Shop






Devision of

ABRAMS Industries GmbH & Co. KG
Hannoversche Str. 38 / 46
49084 Osnabrück / Germany

T: +49 (0) 5 41/3 57 39 - 0
[email protected]

Located in: Osnabrück / Germany
County Court Osnabrück / Germany, HRA 6865
VAT-No.: DE 221940667

General Partner

ABRAMS Industries Verwaltungs GmbH
County Court Osnabrück / Germany, HRB 20019

Managing Director

Dipl.-Wi.-Ing. Dr. Jürgen Abrams


The contents of this application have been carefully compiled based on the best technology currently available.

Please note that the ABRAMS STEEL GUIDE provides an overview of general properties and uses and is therefore intended to facilitate the selection of materials. Not least of all due to the numerous application possibilities and their influencing factors, an express written agreement is required in every case in order to guarantee certain properties and values. A liability of any kind will otherwise be excluded. See also

ABRAMS Industries GmbH & Co. KG is the sole owner of all rights and contents of this application, unless otherwise indicated. Any further use of any content or results of use in other programs or in print or online media without written authorisation is prohibited. The contents of this application are subject to continuous development. In order to always be able to use the most up-to-date information, the user should inform oneself about any possible updates in the App Store. The contents of this application, whether it be part or the entirety, may be changed, supplemented or deleted without prior announcement. There is no obligation to publish the contents permanently.

©2013 / Patent No.: US 8,463,771 B2
Date of Patent: Jun. 11,2013

Design & Realisation:

ABRAMS Industries GmbH & Co. KG,

Realisation of the ABRAMS STEEL GUIDE application for web browser

Qubidu GmbH,
Division of T: +49 541/357 39-0 [email protected] TERMS AND CONDITIONS
ABRAMS Industries GmbH & Co. KG [email protected] DISCLAIMER
49084 Osnabrück / Germany IMPRINT